Insulating a house with EPS
An ETICS system is the foam, the adhesive, the dowels, the mesh, the reinforcing layer and the render. Each one comes off the same area.
Step by step
- Work out the facade area: the building's perimeter times its height, less windows and doors. Count the reveals separately if you are insulating them.
- Choose the foam thickness and count the bundles. Then the dowels: typically 6 per m², more at corners and above 8 m. Count the adhesive twice, once for bonding and once for the reinforcing layer.
- Allow about 10 % on the mesh for overlaps, and take the thin-coat render from its own consumption per m².
Calculators used in this guide
Tip
The dowel count is not one number for the whole house. The corner zone needs them denser than the middle of a wall, and above 8 m the building moves into a higher wind zone. Check the design or the system's guidance before ordering.
LiczMat for Android. Calculators also work on the phone, without internet, and save the result in a project. Download