Sheet cutting calculator: how many sheets
Parts, the sheet size and the saw kerf give the number of sheets and a guillotine cutting plan, with or without rotating the parts.
Result
The figures changed. Press “Calculate again” to see the new result.
Building material catalogue: 34 materials for this calculator
How we calculate it
What you enter
- Sheet width (mm)
- Sheet length (mm)
- Saw kerf (mm)
- Pieces: w×l×qty (mm)
- Rotate pieces
What to watch out for
Guillotine cutting: every cut runs right across the sheet, the way a panel saw works. Turn rotation off when the sheet has a grain or a directional pattern.
Formula
- Expand the list into individual parts and sort them by area, largest first.
- Place each part in the free rectangle that leaves the least free area. Rotate it by 90° if Rotate pieces jest włączony is on and it fits better after rotation.
- Split the used rectangle with a guillotine cut into a right and a bottom offcut. Reduce both offcuts by Saw kerf.
- When a part fits nowhere, a new sheet is opened.
actual waste = (boards × Sheet width × Sheet length − Σ parts) ÷ (boards × Sheet width × Sheet length) × 100%
The site calculates with the same code as the Android app.
Frequently asked questions
How many sheets will my parts take?
The calculator places the parts largest first into the free rectangle with the smallest leftover. When nothing fits any more, it opens another sheet, and that is what you buy.
When should you turn rotation off?
When the board has a grain or a directional pattern. A rotated part would then run visibly the wrong way even though the size fits.
Other calculators
Guides that use this calculator
LiczMat for Android. Calculators also work on the phone, without internet, and save the result in a project. Download