1D cutting calculator: how many bars
A parts list, the stock length and the saw kerf give the number of bars to buy. The cutting plan comes with the waste in percent.
Result
The figures changed. Press “Calculate again” to see the new result.
Building material catalogue: 39 materials for this calculator
How we calculate it
What you enter
- Stock length (mm)
- Saw kerf (mm)
- Pieces: length×qty (mm)
What to watch out for
The saw kerf is subtracted at each consecutive cut in a bar. The cutting layout may not be optimal.
Formula
- Expand the list into individual pieces and sort them longest first.
- Each piece goes into the first bar it fits in: used + (bar not empty → Saw kerf) + piece ≤ Stock length
- When it fits in none of them, a new bar is opened.
actual waste = (Stock length × bars − Σ pieces) ÷ (Stock length × bars) × 100%
The site calculates with the same code as the Android app.
Frequently asked questions
How many bars do you need for a parts list?
The calculator sorts the parts longest first and puts each into the first bar it fits. The number of bars opened is what you buy, and the plan shows which part comes out of which bar.
Is the saw kerf included?
Yes. The kerf is taken off at every cut after the first one in a bar. The first part starts at the end of the stock, so it costs none.
Other calculators
Guides that use this calculator
LiczMat for Android. Calculators also work on the phone, without internet, and save the result in a project. Download